收藏本站
Datasheet
Notice - GE
Rev.002
2014 ROHM Co., Ltd. All rights reserved.
Notice
Precaution on using ROHM Products
1.
Our Products are designed and manufactured for application in ordinary electronic equipments (such as AV equipment,
OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you
intend to use our Products in devices requiring extremely high reliability (such as medical equipment
(Note 1), transport
equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car
accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or
serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance.
Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any
damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific
Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU
CHINA
CLASSⅢ
CLASSⅡb
CLASSⅢ
CLASSⅣ
CLASSⅢ
2.
ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3.
Our Products are designed and manufactured for use under standard conditions and not under any special or
extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any
special or extraordinary environments or conditions.
If you intend to use our Products under any special or
extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of
product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,
H2S, NH3, SO2, and NO2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of
flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning
residue after soldering
[h] Use of the Products in places subject to dew condensation
4.
The Products are not subject to radiation-proof design.
5.
Please verify and confirm characteristics of the final or mounted products in using the Products.
6.
In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse. is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
7.
De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual
ambient temperature.
8.
Confirm that operation temperature is within the specified range described in the product specification.
9.
ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Precaution for Mounting / Circuit board design
1.
When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product
performance and reliability.
2.
In principle, the reflow soldering method must be used; if flow soldering method is preferred, please consult with the
ROHM representative in advance.
For details, please refer to ROHM Mounting specification
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
BQ4285EP IC RTC W/114X8 NVSRAM 24-DIP
BQ4847YMT IC RTC W/NVSRAM CONTROL T-MOD
BU2280FV-E2 IC CLOCK GEN DVD-VIDEO SSOP-B24
BU2363FV-E2 IC CLOCK GEN DVD-VIDEO SSOP-B16
BU2365FV-E2 IC CLOCK GEN W/VCXO SSOP-B24
BU2505FV-E2 IC DAC 10BIT 10-CHAN SSOP-B20
BU2508FV-E2 IC DAC 10BIT 4-CHAN SSOP14
BU3076HFV-TR IC CLOCK GEN 1CH HVSOF6
相关代理商/技术参数
BH223 制造商:ADAM-TECH 制造商全称:Adam Technologies, Inc. 功能描述:BATTERY HOLDERS & SNAPS AA, AAA, C, D & COIN CELL
BH-22-3 制造商:ADAM-TECH 制造商全称:Adam Technologies, Inc. 功能描述:BATTERY HOLDERS D, 9V SINGLE & MULTIPLE CELLS
BH223-L 功能描述:HOLDER CR223A W/SOLDER LUGS RoHS:是 类别:电池产品 >> 电池座，夹，触点 系列:- 标准包装:100 系列:- 电池类型，功能:圆柱形，触点（单） 样式:触点弹簧（线圈） 电池大小:多重 单元数:- 电池系列:- 安装类型:自定义 端接类型:- 板上方高度:- 工作温度:- 配用:P670-ND - BATTERY 1.5V ALKALINE AAA 4 PACKP671-ND - BATTERY 1.5V ALKALINE AA 4 PACKP672-ND - BATTERY 1.5V ALKALINE AAA 2 PACKP673-ND - BATTERY 1.5V ALKALINE AA 2 PACKP674-ND - BATTERY 1.5V ALKALINE AAAP675-ND - BATTERY 1.5V ALKALINE AATL-4903-ND - BATT LTH AA 3.6VLR03XWA/C-ND - BATT IND ALKALINE AAA SIZELR6XWA/C-ND - BATT IND ALKALINE AA SIZEP649-ND - BATTERY IND ALKALINE AAA更多... 其它名称:211K
BH223-X2-411 功能描述:HOLDR BATT 2-CRP2 OR 223A W/CONN RoHS:是 类别:电池产品 >> 电池座，夹，触点 系列:- 标准包装:100 系列:- 电池类型，功能:圆柱形，触点（单） 样式:触点弹簧（线圈） 电池大小:多重 单元数:- 电池系列:- 安装类型:自定义 端接类型:- 板上方高度:- 工作温度:- 配用:P670-ND - BATTERY 1.5V ALKALINE AAA 4 PACKP671-ND - BATTERY 1.5V ALKALINE AA 4 PACKP672-ND - BATTERY 1.5V ALKALINE AAA 2 PACKP673-ND - BATTERY 1.5V ALKALINE AA 2 PACKP674-ND - BATTERY 1.5V ALKALINE AAAP675-ND - BATTERY 1.5V ALKALINE AATL-4903-ND - BATT LTH AA 3.6VLR03XWA/C-ND - BATT IND ALKALINE AAA SIZELR6XWA/C-ND - BATT IND ALKALINE AA SIZEP649-ND - BATTERY IND ALKALINE AAA更多... 其它名称:211K
BH223-X2-W 功能描述:HOLDER 2 DL223A 12V 6" WIRE LEAD RoHS:是 类别:电池产品 >> 电池座，夹，触点 系列:- 标准包装:100 系列:- 电池类型，功能:圆柱形，触点（单） 样式:触点弹簧（线圈） 电池大小:多重 单元数:- 电池系列:- 安装类型:自定义 端接类型:- 板上方高度:- 工作温度:- 配用:P670-ND - BATTERY 1.5V ALKALINE AAA 4 PACKP671-ND - BATTERY 1.5V ALKALINE AA 4 PACKP672-ND - BATTERY 1.5V ALKALINE AAA 2 PACKP673-ND - BATTERY 1.5V ALKALINE AA 2 PACKP674-ND - BATTERY 1.5V ALKALINE AAAP675-ND - BATTERY 1.5V ALKALINE AATL-4903-ND - BATT LTH AA 3.6VLR03XWA/C-ND - BATT IND ALKALINE AAA SIZELR6XWA/C-ND - BATT IND ALKALINE AA SIZEP649-ND - BATTERY IND ALKALINE AAA更多... 其它名称:211K
BH224 制造商:ADAM-TECH 制造商全称:Adam Technologies, Inc. 功能描述:BATTERY HOLDERS & SNAPS AA, AAA, C, D & COIN CELL
BH225 制造商:ADAM-TECH 制造商全称:Adam Technologies, Inc. 功能描述:BATTERY HOLDERS & SNAPS AA, AAA, C, D & COIN CELL
BH22834E-30 制造商: 功能描述: 制造商:undefined 功能描述: